pLabs5

El hack de Linux para PS5 ahora es compatible con (algunas) versiones de firmware más recientes. Quizás recuerdes haber oído que la PS5 ahora puede ejecutar Linux . El problema era que necesitaba una consola con un firmware mucho más antiguo, mucho antes de que Sony eliminara las vulnerabilidades utilizadas. Bueno, la puerta de la fuga de la cárcel está entreabierta de nuevo ( 'busca una metáfora mejor, Joey' – el mundo). El nuevo  proyecto pLinux5-NG  adapta el antiguo gestor de arranque Linux de la PS5 para utilizar un conjunto diferente de exploits: Relapse jailbreak y Byepervisor-Reborn, este último para eludir las protecciones del hipervisor de la consola. Permite arrancar Linux en consolas PS5 con versiones de firmware más recientes que las requeridas anteriormente, incluso la versión 13.60 de julio de 2026. Pero —ojo— esta iniciativa solo es compatible con el firmware 13.20. La última versión del firmware 14.x de Sony también bloquea las vulnerabilidades que se aprovechan de esto. Dado que el acceso a PSN requiere el software del sistema más reciente, los jugadores ocasionales con un interés particular en el jailbreaking podrían preferir usarlo según lo previsto. Los indicadores de referencia que ofrecen recompensas son prometedores. Actualmente, la mayoría de los propietarios de PS5 no desean usar GIMP ni navegar por internet con Firefox en su consola. Su principal objetivo es utilizar el hardware de Sony como un PC de juegos Linux convencional y ejecutar títulos de Steam, etc. Las pruebas realizadas con versiones anteriores del firmware arrojaron resultados interesantes.  Según se informa, GTA V Enhanced  funcionaba a casi 60 fps a 1440p. Si bien estos resultados no se replican con el nuevo gestor de arranque del firmware más reciente, demuestran la utilidad del proyecto. Una PS5 nunca será una PC para juegos Linux práctica. Es mucho más sencillo (y económico, para quienes necesiten comprar una consola sin actualizar) armar, comprar o actualizar una PC tradicional. Pero los esfuerzos de adaptación de software como este no se tratan tanto de "por qué" sino de "por qué no". Cada revisión de firmware que se pueda realizar para ejecutar Linux, independientemente de los avances y obstáculos que ello implique, acerca un poco más la idea de ejecutar juegos de PC en una PS5 a la realidad.

Linux on 13.60 I just got it to boot a couple minutes ago so I still need to work on stability and getting a Wi-Fi driver working. Then I need to send everything I found out to the good people at pLabs5/pLinux5-NG Well it turns out I had my nose so deep in this project I didn't realize someone had already demonstrated it 16 hours ago 🤦. Probably should have waited instead of spending the last 3 days tearing apart the firmware 😅 youtu.be

¡LINUX APUNTA A PS5 HASTA FW 13.60! ◽ Basado en ps5-linux-loader ◽ Utiliza Byepervisor-Reborn ◽ Objetivo: FW 8.xx–13.60 ◽ Soporte inicial: 13.20 ⚠️ Muy experimental. No funciona aún en todos esos firmwares. pLabs5/pLinux5-NG

First unofficial a Linux loader for fw 8.xx - 13.60? Guys 5 hours ago from the time Im posting this 2 developers on github that goes by the name: [niko86c & dseif0x] launched the first experimental Linux launcher for firmware ranging from 8.xx all the to 13.60. As of currently their github repository is showing that only firmware 13.20 has been tested has supported. The newly released Bypervisor Reborn is being used as the foundation for this as well as the older PS5 Linux loader that works from fw 3.xx - 7.61. It is still VERY and I mean VERY new and unstable so don't expect to boot up Linux or matter in fact steam on it just yet. Im sure in a month time we will actually get a genuine Linux loader. We are living though such a golden era for PS5 Jailbreak Here's the link the Github page I attached. If any of guys can personally do the building aspect of it then hopefully someone og you guys can update us on it how it boots up.

pLabs5/pLinux5-NG: PS5 Linux for high FW's (8.xx, 9.xx, 10.xx, 11.xx, 12.xx, 13.xx) PS5 Linux for high FW's (8.xx, 9.xx, 10.xx, 11.xx, 12.xx, 13.xx) pLinux5-NG boot linux on PS5 consoles running high firmware (8.xx through 13.60) this project is a port/rework of the existing ps5-linux-loader (which currently works on 3.00 though 7.61) to the new byepervisor-reborn hypervisor escape - the linux boot pat itself (bzImage/initrd relocation, boot_params/e820 setup, hardware bring up, SVM/IOMMU teardown, the jump to startup_64) is brought over from the existing ps5-linux-loader - the **escape* -- how we get code running in hypervisor root mode on all cores on high firmware -- is what has changed in this project. on 3.00 through 7.61 its flatz' ACPI-wakeup ROP chain; on high firmware it is a khook on the S3-resume HV_MP_STARTUP_CALL path. as implemented in Byepervisor-Reborn. usage CRITICAL ps5 configuration: enable rest mode features: settings -> system -> power saving -> features available in rest mode, set Supply Power to USB Ports to Always disable HDMI device link: settings -> system -> HDMI, set Enable HDMI Device Link to be off installation follow ps5-linux-loader installation until you get to step 4, then come back here. running the jailbreak - set your playstations DNS under: settings -> network -> settings -> set up internet connection then click the options button on your controller, then select advanced settings, from there set primary DNS to 45.56.67.85 then select ok you will get a popup saying internet connection failed, thats good, continue. - navigate to the users guide: settings -> Guide & Tips, Health and Safety, and Other Information -> User's Guide. when a popup appears saying: the secuirty of the page can't be confirmed..., click yes you should end up in a page with big letters saying RELAPSE, click the Jailbreak button & wait for it to finish it finishing will be marked by elfldr starting. now download the pLinux5-NG.elf from releases, or see [building](#building) to build from source, then move to [sending](###sending) sending on linux/unix, use: # (from the area with the repo + pLinux5-NG.elf) cd scripts/ chmod +x send.sh ./send.sh PS5_IP=<Playstation 5s IP> PS5_PORT=9021 pLinux5-NG.elf building Requires the PS5 payload SDK and the pLabs5 host toolchain override: export PS5_PAYLOAD_SDK=/path/to/ps5-payload-sdk export LLVM_CONFIG=/path/to/pLabs5-SDK/tools/nixos/llvm-config make -j The output is bin/pLinux5-NG.elf. The shellcode blobs are compiled freestanding with the host gcc (-ffreestanding -nostdlib) and embedded as C headers; scripts/bin2c.py replaces xxd -i, which is not present in every environment. Sending socat -t 99999999 - TCP:$PS5IP:9021 < bin/pLinux5-NG.elf # or nc -N $PS5IP 9021 < bin/pLinux5-NG.elf License The project is licensed under the AGPL-3.0 (see [LICENSE](LICENSE)). The boot path and shellcode are derived from ps5-linux-loader, which is GPL-3.0; those files retain their original authorship and are used here in accordance with the GPL/AGPL compatibility provisions. The high-firmware escape is adapted from Byepervisor-Reborn. See [PORTING.md](PORTING.md#credits). legal I, niko86c/pLabs5, as well as its contributers, are not affiliated with, associated with, sponsored by, endorsed by or otherwise established with Sony Interactive Entertainment, Playstation, or any of their other companies or works unless explictly stated otherwise. *Just because a explict mention above isn't present does **NOT mean otherwise.* All software is provided "as is", without warranty of ANY kind, express or implied. Use all software at your own risk. You are solely responsible for complying with terms of service of all programs, as well as any applicable law.

🐧 Linux on PS5 — High Firmware Support 🔥 The pLinux5-NG project aims to bring Linux to PS5 consoles running firmware 8.xx–13.60! 🚀 💻 A new step toward turning the PS5 into a powerful Linux machine. pLabs5/pLinux5-NG t.co

I haven’t tested this yet but I’d imagine it works. Source - @Jdr8245Jhon pLabs5/pLinux5-NG

ps5 linux ported to 13.60 can anyone with good knowledge say if this could actually work? Ill test this myself later but I just wanted to know what you guys think.

Linux para PS5 até versões 13.60 Isso abre porta para muitas coisas . pLabs5/pLinux5-NG

pLinux5-NG boot linux en consolas PS5 con firmware alto (8.xx hasta 13.60) pLabs5/pLinux5-NG