half144

Release LZ4 Compression v1.4.2 · theghostonline/PS5-LZ4-Compression LZ4 Compression for PS5   LZ4 compression for PS5 games, done entirely on the console. Pick a game, choose Compress with LZ4, and it packs the game data into seekable LZ4 asset packs that APR-EMU reads while the game runs, checks every file, and installs the pack-capable APR-EMU runtime (adding it when the game ships none). The game never has to leave the console. It also does everything around that: .ffpfsc compression, exFAT/PFS images, validate and repair, APR-EMU versions, copy and move, and a history of every job. Unofficial, and not affiliated with any of the projects it builds on. See [Credits and license](#credits-and-license). The app - The PS5 app (LZ4 Compression, title PPSA99420): a native app, no browser. Your library runs left to right like the home screen, every game opens its own page, and every action opens as a full page. D-pad and stick navigation with controller vibration, and Circle goes back. - The engine (lz4-compression.elf): the payload that does the work. It serves the app and the web page on port 5920 and keeps its settings, caches and logs in /data/LZ4Compression. The app starts it through Payload Manager when it isn't running. - The web page at http://<PS5 IP>:5920 has the same features from a PC or phone, and it's where you upload TOML profiles from another device. - It doesn't share a tile, port or settings folder with Game Compressor, so both can be installed. Install 1. Download lz4-compression.elf and LZ4-Compression-PPSA99420.zip from the latest release. 2. Add lz4-compression.elf to Payload Manager, so it sits at /data/pldmgr/payloads/lz4-compression/lz4-compression.elf. The app starts it from there. 3. Unzip the app and copy the PPSA99420 folder to /data/homebrew/PPSA99420 over FTP. ShadowMount+ adds the LZ4 Compression tile. It doesn't scan while a game is running, so close any game if the tile doesn't show up. 4. Open the tile. If the engine isn't running, the app starts it. You can also skip the app: load the ELF and open http://<PS5 IP>:5920 in any browser. LZ4 asset packs APR-EMU (drakmor's ampr_emu) can read game data from seekable LZ4 asset packs while the game runs. LZ4 Compression builds those packs for you: 1. Builds ampr_emu.index for the complete game. 2. Picks what to pack. The automatic profile scans the game: game data is packed, while executables, PRX/SPRX, sce_sys, sce_module, fakelib, saves, configs and already-compressed media stay loose. Large files that LZ4 can't shrink are sampled and left loose automatically. 3. Compresses every block with LZ4 at the level you pick (1 to 12) on all CPU cores. 4. Writes ampr_assets.index, its .crc and .runtime sidecars and the ampr_assets-*.pak volumes (AMPRPAK4 / AMPRDAT3, the same format ampr_pack.py writes). 5. Checks every packed file byte for byte against the original before anything is deleted. 6. Installs the pack-capable APR-EMU runtime (0.4.2.1 PackedStdio) into fakelib/libSceAmpr.sprx. How to use it LZ4 is the main action for every game that uses AMPR, which is most PS5 games, whether or not the dump ships APR-EMU. The app checks the game's eboot.bin and sce_module for the libSceAmpr import. When the game has no fakelib/libSceAmpr.sprx, packing adds the pack-capable APR-EMU runtime there, and ShadowMount+ loads it in place of the system module when the game starts. A game that never imports AMPR can't load APR-EMU, so it gets .ffpfsc compression instead. Folder games work directly; .exfat, .ffpfs and .ffpfsc images are mounted through ShadowMount+ for the job (close any running game first, ShadowMount+ won't mount while one is open). Open the game from the library: Compress with LZ4 is its main button. .ffpfsc Compress is under Options. - Compression level: the same 1 to 12 scale as Lazy_AMPR. 1 to 4 use LZ4's fast mode, 5 to 12 use LZ4 HC. 9 is the default, 12 is the smallest and slowest. - Packing profile: Automatic picks the best profile on its own. The app ships the tested community profiles from [profiles/](profiles/) (ASTRO BOT, EA Sports UFC 6, and the Insomniac and Unity engine profiles) and matches them by Title ID, by name, or by the game's file layout, so a matching game already has the right TOML when you open it. The game page shows which one it will use. Games without a match get the scan-based profile, and Scan only skips the bundled one. - Custom or Trace Config uses your own ampr_pack TOML, for example one generated from APR traces with ampr_pack_profile.py or a community profile for the game. Two ways to get one in: - Import config in the PS5 app (or Import From Console on the web page) lists the .toml files in /data/LZ4Compression/import and on any USB drive (top folder, toml, tomls, toml_profiles, profiles, LZ4Compression or Lazy_AMPR). Files named after the Title ID or the game's name show up first, the same matching Lazy_AMPR uses. include_from lists next to the TOML are copied with it. - Upload profile.toml plus any include_from lists it names from a PC or phone browser. Your own config always wins over the bundled one. Profiles are stored in /data/LZ4Compression/lz4-profiles/<TITLE_ID>/, and the scan-based profile also learns the loose rules from every bundled and uploaded profile. - Destination: next to the game, internal SSD or external storage. The output is a game folder named <name>-lz4. - Original handling: - Keep original leaves the source alone. - Delete after verified removes it after the packs and every copied file were checked. - Pack in place (folders only) writes the packs inside the game folder, verifies them, then removes only the originals that are now inside the packs. It needs the least free space. If anything fails before the removal step, the folder, its ampr_emu.index and its APR-EMU file are put back exactly as they were. LZ4 packed games show an LZ4 Packed chip, and their main action becomes Verify LZ4 Packs, which decodes every block and checks it against the CRC sidecar. Uncompress LZ4 restores the loose game, either in place or as a new folder. While a game is LZ4 packed, Build AMPR Index, Choose APR-EMU Version and Restore Original APR-EMU are blocked: the packs are tied to that exact ampr_emu.index, and only the PackedStdio runtime can read them. The original APR-EMU file is backed up first, so Restore Original APR-EMU is offered again once you uncompress that folder in place. Compress to .ffpfsc and Make Image still work on a packed folder and keep its index untouched. How it was checked - The C packer was compared with drakmor's ampr_pack.py driven by Lazy_AMPR's own profile generator on the same files. File records, chunk records, pack volumes and CRC sidecars are byte-identical at LZ4 HC 9 and HC 12, with the automatic profile, a custom profile (streaming, striping, store, hash and round-robin lanes, group dedupe, volume rollover, include_from) and with learned loose patterns. Only the build ID differs. LZ4 fast output matches the official LZ4 1.10.0 library (ampr_pack.py with python-lz4 uses LZ4 1.9.4, which compresses fast mode differently). - ampr_pack.py verify --root, inspect and unpack accept the packs built on the PS5. - On a PS5 running firmware 13.60, packing, verifying, unpacking and in-place round trips through the app gave byte-identical results, on both internal storage and an exFAT M.2 drive. - Packing straight from a ShadowMountPlus-mounted .exfat image on the PS5 passed ampr_pack.py verify --root against the original files, and unpacking those packs gave back every file byte for byte. .ffpfsc sources use the same code path but haven't been tested on a console yet. Results vary by game, and a trace-based profile is more reliable than the automatic one. Keep a backup and launch the game before you delete its original. Firmware 13.60 and ShadowMountPlus 1.7 Works with the current mount stack, so Validate, Validate and Repair and Update APR-EMU work on current consoles: - Built with ps5-payload-sdk v0.43, whose CRT supports firmware 13.60. - Accepts ShadowMountPlus 1.7's layered mount_img.lnk format. SMP 1.7 writes the link to the outer container (layers=2, e.g. /data/homebrew/GAME.ffpfsc) instead of the 1.6-style nested path (/mnt/shadowmnt/pfsc/<name>/GAME.exfat). The remount verification now derives the expected nested directory from the actual link and accepts the layered form, so compressed .ffpfsc titles pass the mount gate again. - Accepts folder titles exposed as real files on /system_ex (firmware 13.60 behavior with kstuff 1.11), not only nullfs overlays, in the system_ex binding check used by Update APR-EMU and mount verification. - Self-healing mounts: SMP keeps its LVD image mounts across restarts while LZ4 Compression clears mount links at the start of mount-dependent operations, which could previously leave both sides waiting on each other. While waiting for a remount, LZ4 Compression now asks SMP's local API to mount the title (POST 127.0.0.1:10101/api/v1/games/mount) after 5 s and every 15 s afterwards, so Validate, Validate and Repair, and compress finalize recover on their own. The nudge is a best-effort hint: if SMP's API is disabled the wait falls back to the previous scan/restart behavior. Tested on PS5 firmware 13.60 with kstuff-lite 1.11 and ShadowMountPlus 1.7beta3/1.7beta4: a 67 GB title compressed to .ffpfsc (19.5 GB) and its full hash validation (1,029,215 blocks) completed clean, with the title mounted and launchable afterwards. Rest mode and interrupted jobs During ordinary copying, compression, unpacking, scanning, and validation, LZ4 Compression allows automatic rest mode. If the PS5 preserves the payload process, the worker continues after wake and the web UI refreshes its progress and history when reopened. During source deletion, destructive stream compression, block repair, and mount/configuration changes, LZ4 Compression renews the console's automatic rest timer until the critical phase ends. The power timer cannot prevent someone from choosing rest mode manually. Avoid manual rest while an operation is changing existing game data. If the payload stops during rest or restarts afterward, unfinished jobs are recorded as interrupted in history. Queued jobs are cancelled, and running jobs are marked failed; neither is restarted automatically. Inspect the source and output paths before retrying, especially after destructive compression or deletion. Main Features - Compress mounted game folders or images into FF-PFSC output. - Choose PFS or exFAT output when compressing. - Automatically build APR Emu ampr_emu.index before compressing APR titles. - Manually run Build AMPR Index on a folder when you only want to refresh the APR index. - Compress games into seekable LZ4 asset packs on the PS5, verify them, and uncompress them again (see above). - Validate compressed games and repair detected PFSC block issues when possible. - Uncompress compressed games back to folder/app form. - Move supported titles between internal storage and USB storage. - Track progress, speed, estimated remaining time, and operation history. - Keep operations running on the PS5 even if the app or the browser tab closes. APR Emu Support APR Emu titles need an ampr_emu.index file and the correct ShadowMountPlus read-only image settings when they are run from internal SSD. LZ4 Compression handles those details for the common workflows: - To compress a folder-format APR Emu game from USB and run it from internal SSD, plug in the USB drive, select the title, and choose Compress. The app builds ampr_emu.index using the same workflow as build_ampr_index.py, writes the ShadowMountPlus read-only and sector-size settings, creates the .ffpfsc image, mounts it, and validates the mounted image byte-for-byte against the original. - If the compressed game stutters and you still want it on internal SSD, open the game page and choose Uncompress under Options, then select exFAT. The ShadowMountPlus settings and ampr_emu.index are already in place, so the app leaves them unchanged and creates an uncompressed exFAT image. - If you already know the game should stay uncompressed, choose Make Image under Options, then select exFAT and Internal SSD. LZ4 Compression detects the APR Emu title, builds or refreshes ampr_emu.index, applies the read-only ShadowMountPlus settings, and creates the uncompressed image. - If you already have an exFAT image and ampr_emu.index exists, use `Set Read Only` under Options to apply the ShadowMountPlus read-only settings for that image. The only unsupported automatic case is an existing exFAT image with no ampr_emu.index. For that case, run the game once from external USB without read-only settings so APR Emu can create its index, confirm the game starts, then copy it to internal SSD and use Set Read Only. Non-APR titles keep the normal compression path. When APR indexing is performed, the selected game screen and operation history show APR indexed. The in-app APR-EMU Version picker uses Pippo's public APR-EMU manifest and binary mirror: https://pippo26442999.github.io/.exFAT/ampr-emu-drakmor/manifest.json The manifest and hosted files are provided by Pippo (pippo26442999). Manifest entries are downloaded by the browser, uploaded to LZ4 Compression, cached under /data/LZ4Compression/ampr-emu, and then applied to the selected title or image. Custom .sprx/.prx files can also be uploaded manually from a desktop browser. The upstream APR Emu project source is drakmor/ampr_emu. Requirements - A PS5 homebrew environment capable of running payload ELFs. - ShadowMountPlus latest version, installed and managing mounted titles. - KStuff Lite 1.07 Beta or later. - Payload Manager or another method to launch lz4-compression.elf. This project assumes you already understand the risks of running PS5 homebrew payloads. Keep backups of important data and test with non-critical titles first. Build For firmware 13.60, use ps5-payload-sdk v0.43 or newer. Its CRT contains the 13.60 kernel initialization case. Earlier builds can fail before main() and create no application log. The build checks the SDK CRT for that case and refuses an unsupported SDK. On Linux or WSL, install make, Python 3, Clang 18, and LLD 18. Set PS5_PAYLOAD_SDK to the extracted SDK path, then run make: export PS5_PAYLOAD_SDK=/path/to/ps5-payload-sdk make The needed zlib 1.3.1 sources are included under third_party/zlib and are built for PS5 along with the payload. No external zlib path is required. The build output is: lz4-compression.elf The 13.60 build has been checked for successful compilation and ELF format. A locally built payload was also launched successfully on a PS5 running firmware 13.60. GitHub Actions builds the ELF on pushes and pull requests. Pushing a v* tag also creates or updates a GitHub Release containing lz4-compression.elf and SHA256SUMS. The workflow downloads the pinned SDK v0.43 release, verifies its SHA-256 checksum, and checks that its CRT contains the firmware 13.60 case. LZ4 1.10.0 (third_party/lz4) and the pinned APR-EMU PackedStdio runtime (third_party/ampr_emu, SHA-256 checked at build time) are included too. The LZ4 packer also builds on a PC so it can be checked against ampr_pack.py: make -f tests/host/Makefile build/host/ampr_pack_cli pack <game folder> <output folder> --embedded-runtime python ampr_pack.py verify --index <output folder>/ampr_assets.index --root <game folder> tests/ps5/Makefile builds lz4-selftest.elf, which packs, verifies, unpacks and round-trips /data/lz4test/game on the console and writes /data/lz4test/selftest.log. tests/ui/run.sh checks the web UI on a PC: it starts a stub of the payload API and drives the page in Playwright's WebKit (library, game pages, LZ4 and compress pages, back navigation, splash and done screens, phone width). It needs Pillow and Playwright (pip install pillow playwright and playwright install webkit). Generated build outputs are intentionally ignored by git: build/ gen/ lz4-compression.elf The PS5 app app/lz4-compression is the console app (title PPSA99420): the library, game pages and action pages with D-pad and stick navigation, controller vibration and no browser. It talks to the engine (lz4-compression.elf) on 127.0.0.1:5920 and starts it through Payload Manager when it isn't running. The web page on port 5920 stays available from a PC or phone, for example to upload LZ4 profiles. It is built with PS5 React on macOS (Apple Silicon): git clone https://github.com/half144/ps5-react.git && cd ps5-react python3 -m venv .venv && .venv/bin/pip install -r requirements.txt && npm ci brew install cmake sdl2 llvm@18 curl libarchive PATH="$PWD/.venv/bin:$PATH" npm run dev -- --app-dir ../PS5-LZ4-Compression/app/lz4-compression # desktop preview PATH="$PWD/.venv/bin:$PATH" npm run build -- --app-dir ../PS5-LZ4-Compression/app/lz4-compression # dist/PPSA99420 Keep LLVM 18 out of PATH (the build finds it on its own); the host tools need Apple's clang. Copy dist/PPSA99420 to /data/homebrew/PPSA99420 and ShadowMount+ adds the tile. Deploy Copy the built ELF to your PS5 payload folder. A typical Payload Manager path is: /data/pldmgr/payloads/lz4-compression/lz4-compression.elf This repo also includes Payload Manager metadata in: payload-manager/lz4-compression.elf.json Fill in its checksum with the SHA-256 of the ELF you publish (each build has its own linker build ID, so every build has a different hash; release builds list theirs in the release's SHA256SUMS). How To Use 1. Make sure ShadowMountPlus has mounted one or more games. 2. Open the LZ4 Compression tile, or load lz4-compression.elf and open http://<PS5_IP>:5920/ in a browser. 3. Move along the library row and open a game. 4. Use the main button on the game page: - Games that use AMPR show Compress with LZ4. - Other folder and image games show Compress (.ffpfsc). - Compressed games show Validate and Repair. - LZ4 packed games show Verify LZ4 Packs. 5. Everything else is on the same page under Options, grouped as Compress, Check, Restore, APR-EMU, Copy and move, and Delete. 6. Use the History button in the top bar to review previous operations. The home screen also shows the most recent ones. Jobs run in the engine, so they keep going if you close the app or the browser. Open either again to see the current job. When you're done, use the power button in the top bar to stop the engine before you play. Compression Settings When you choose Compress, LZ4 Compression asks for the output format, destination, and how to handle the original source. Format Compress always produces a .ffpfsc file, which is a compressed PFS container. The format choice controls the nested image stored inside that compressed container: - exFAT is the default and recommended nested image format. It stores an exFAT image inside the .ffpfsc output and is the preferred option for most games, especially APR Emu workflows. - PFS Experimental stores a PFS image inside the .ffpfsc output. Use it only when you specifically want to test the PFS nested-image path. Destination - Compress in place writes the compressed .ffpfsc container next to the currently selected game. - Internal SSD writes the compressed output under /data/homebrew. This is only shown when the selected game is not already on internal storage. - External Storage writes the compressed output to a selected USB/external target. If the game is already on external storage, LZ4 Compression may show a Compress to... picker so you can choose internal SSD or another USB target. Original Handling - Keep original leaves the source folder or image untouched. This is the safest choice and requires enough free space for the compressed output. - Delete after verified writes and validates the compressed output first, then removes the original source. This is the default for in-place compression. It still needs full-size temporary free space because the original is kept until verification succeeds. - Destructive deletes source data while writing the compressed output. It requires at least 1 GB of free space, cannot be cancelled after the unsafe phase begins, and is only available for same-storage folder compression. It is not available when compressing to another drive or when using Make Image. When compressing to internal SSD or external storage, LZ4 Compression keeps the original by default. If you choose to remove the original, it uses the safer Delete after verified behavior. Game Discovery The library only lists games. Apps that ShadowMount+ mounts next to them (homebrew, media apps) are left out: anything under 2 GB once its size is known counts as an app. Mounted games are shown automatically. LZ4 Compression also scans known game storage folders, including: /data/homebrew /data/etaHEN/games /mnt/ext0 /mnt/ext0/homebrew /mnt/ext0/etaHEN/games /mnt/ext1 /mnt/ext1/homebrew /mnt/ext1/etaHEN/games /mnt/usb0 through /mnt/usb7 /mnt/usb0/homebrew through /mnt/usb7/homebrew /mnt/usb0/etaHEN/games through /mnt/usb7/etaHEN/games When You Are Done Only run LZ4 Compression while you need to compress, validate, repair, move or unpack games. Once you're done, close it so it doesn't take anything away from your games. In the app, use the power button in the top bar and pick `Stop engine and close`. The engine stops and the app closes, and the tile stays on the home screen for next time. On the web page the power button stops the engine and shows a closing screen. Notes - Payload operations are owned by the PS5-side engine, not the app or the browser tab. - Compression and repair workflows can take a long time on large titles. Support LZ4 Compression was built and tested on a real console, one game, pack and firmware quirk at a time. Donations here go to this project, not to the projects it builds on (see the credits below). If it saved you space on your PS5, a coffee helps cover the cost of building it and keeps the updates coming. <a href="buymeacoffee.com"><img src="cdn.buymeacoffee.com" alt="Buy Me a Coffee" height="50"></a> Not able to donate? A star on the repository and a bug report with the game, title ID and firmware help just as much. Credits and license LZ4 Compression is built on PS5 Game Compressor by Juma Sayeh, with firmware 13.60 and ShadowMountPlus 1.7 support by gcoding97 and Krenar, and its LZ4 side follows Lazy_AMPR by Nazky, Deckerr97, Pippo, Drakmor and williamtcastro. Packed games are read by Drakmor's ampr_emu. Third-party components and their licenses are listed in THIRD_PARTY_NOTICES.md; original copyright notices are kept in the source files. Disclaimer This is homebrew software for experimental PS5 workflows. Use it at your own risk. The project is not affiliated with Sony, PlayStation, or any game publisher. To be used with own game dumps.

⭐️Pirates made their @PlayStation Store for the hacked PS5 - Overdrive came out half144/overdrive-releases t.co

La tienda Overdrive de PS5 ha cambiado la URL del repositorio, la pueden descargar ahora en: overdriveps5/overdrive-releases t.co

На PS5 появился свой зелёный магазин — Overdrive, где все игры бесплатные Выглядит он, как и обычный PS Store. При этом мы получаем халявную закачку на консоль без участия ПК, флешек и т.д Сервис сам распаковывает архивы, поддерживает до 64 одновременных соединений и умеет обновляться. Для работы нужна прошивка 13.60 Скачать имбульку можно тут https://github.com/half144/overdrive-releases репозиторий снесён, если появится рабочий форк, добавлю Возможно скоро добавлю в описание Саба чтобы не потерять

@rafael77409 Opened an MR to include this in github: overdrive-releases#16

@allmight_dev It requires a jailbroken PS5, and the claim of access to all PlayStation Store games and DLCs isn't verified half144/overdrive-releases

Usan PS5 con Jailbreak y quieren algo como la PS Store directo a la consola sin pasar por PC, acortadores, publicidad y mierdas varias?? Mi recomendación, Usen esto... half144/overdrive-releases